+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Mod General Discussion (https://discoverygc.com/forums/forumdisplay.php?fid=37)
+--- Thread: Colonial Dreadnought - my try to model smth :D (/showthread.php?tid=132545)
Colonial Dreadnought - my try to model smth :D - KUBANA - 08-12-2015
Greetings
It might not be top class modeling
It is one of my first attempts to model something. was working on it for a while but abandoned the project long ago. It is not finished, it was supposed to have front firing gun on its front, protruding from hull. I was about to model engines, one big to the center of its behind, and two lesser ones being placed underneath the wings. And then some fancy stuff.What do you say
https://p3d.in/garhC <- <- <- <- HERE'S THE LINK!
RE: Colonial Dreadnought - my try to model smth :D - HappyKiller911 - 08-12-2015
I like it very much. Nice job! How much it took you to make it?
RE: Colonial Dreadnought - my try to model smth :D - Lythrilux - 08-12-2015
That's actually not bad. I'd say the only issue is that the underside is too flat. Add some more roundness and form to that part of the model and you might have something quite excellent.
RE: Colonial Dreadnought - my try to model smth :D - TheFreelancer - 08-12-2015
Nice, but atm It kinda looks like a luxury yacht tbh, but good job!
RE: Colonial Dreadnought - my try to model smth :D - KUBANA - 08-12-2015
(08-12-2015, 01:45 PM)HappyKiller911 Wrote: I like it very much. Nice job! How much it took you to make it?
Well I was modeling it for a couple of days intense. Was working with couple of former =CR= members on skype who were giving me some ideas what to change and so on and was kinda inspired by an old sketch I found on internet but changed stuff according to my and =CR= ideas.
RE: Colonial Dreadnought - my try to model smth :D - KUBANA - 08-12-2015
(08-12-2015, 01:46 PM)Lythrilux Wrote: That's actually not bad. I'd say the only issue is that the underside is too flat. Add some more roundness and form to that part of the model and you might have something quite excellent.
Yeah the underside is definitely unfinished and was about to work on it by placing some stuff there, maybe second smaller bridge dedicated to front gun aiming and so on so yeah.
The concept was to make a small, fast dreadnought with front gun, which was supposed to be a RAILGUN with huge hull damage and virtually no shield damage, with small thin frame to be able to make querilla ops against Gallia in asteroid belts.
The railgun was supposed to look somehow like this: http://p3d.in/EfV8Z without that long box behind it and I was thinking about a way how to insert it to the hull to fit in and look good
RE: Colonial Dreadnought - my try to model smth :D - henryk5pio - 08-12-2015
Good job KUBANA
Take that model to the end, and report it to include the game. Colonial Republick ship line is (for my taste) poor. Useful for something new. Additionall,some units are very agile, and some vice versa...
RE: Colonial Dreadnought - my try to model smth :D - KUBANA - 08-12-2015
(08-12-2015, 02:53 PM)henryk5pio Wrote: Good job KUBANA
Well dunno
haven't even blender installed now
RE: Colonial Dreadnought - my try to model smth :D - Fluffyball - 08-12-2015
Good job.
So, this is the moment when people are starting to do their stuff, and I can't cope with my own project. :x
RE: Colonial Dreadnought - my try to model smth :D - KUBANA - 08-12-2015
(08-12-2015, 03:11 PM)Fluffyball Wrote: Good job.
So, this is the moment when people are starting to do their stuff, and I can't cope with my own project. :x
Dont worry
keep up with your project