Discovery Gaming Community
Request: Renders of the Junker Gunboat - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: The Community (https://discoverygc.com/forums/forumdisplay.php?fid=4)
+--- Forum: Media Center (https://discoverygc.com/forums/forumdisplay.php?fid=18)
+--- Thread: Request: Renders of the Junker Gunboat (/showthread.php?tid=120790)

Pages: 1 2 3 4

RE: Request: Renders of the Junker Gunboat - Tenacity - 09-19-2014

I can remove the backgrounds manually but it would definitely save me some hassle.

RE: Request: Renders of the Junker Gunboat - Luke. - 09-19-2014

Shall do later. Work calls.

RE: Request: Renders of the Junker Gunboat - Tenacity - 09-21-2014

Had a chance to do them yet luke?

RE: Request: Renders of the Junker Gunboat - Gulryz - 09-21-2014

I can do that
Edit: Pm sent

RE: Request: Renders of the Junker Gunboat - Luke. - 09-21-2014

(09-21-2014, 03:45 AM)Tenacity Wrote: Had a chance to do them yet luke?

No, sorry. Life called so I couldn't get round to it. If you're still in need then let me know.

RE: Request: Renders of the Junker Gunboat - Tenacity - 09-21-2014

It's ok, think I've got what I need now.

And first bit of stuff produced from it:
[Image: 2eeio75.gif]


RE: Request: Renders of the Junker Gunboat - Luke. - 09-21-2014

I need to learn how to make gifs...so badly. Nice work.

RE: Request: Renders of the Junker Gunboat - Tenacity - 09-21-2014

It's not difficult, just very time consuming. At least the way I do it - making each individual frame as a .png and then combining them as layers in GIMP.

RE: Request: Renders of the Junker Gunboat - Tenacity - 09-21-2014

Here's my first iteration of the wrecker floor plans:

[Image: 3166gxg.jpg]

It's a difficult ship to work with, though. I love how it looks, but the in-game model suggests that it is far, far larger than the model's appearance. Having the entire front section an open "window" makes it look like it should be the size of a heavy freighter or small gunboat, but the physical size of the ship (flying it next to other capships) suggests that it's the size of a large gunboat or small destroyer.

So coming up with realistic floorplans proves challenging. I chose to make it a bit on the smaller side internally, but to leave a lot of open space in the front to fit with the huge windows.

RE: Request: Renders of the Junker Gunboat - Tenacity - 09-23-2014

These are more or less my finished floor plans for the wrecker, ended up going with just two levels (and even that feels a bit too big for the ship):

[Image: 2uf34gz.jpg]
[Image: 29dk27n.jpg]