+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Mod General Discussion (https://discoverygc.com/forums/forumdisplay.php?fid=37)
+--- Thread: Possibility of this vessel in Disco (/showthread.php?tid=135937)
RE: Possibility of this vessel in Disco - Corile - 02-11-2016
(02-10-2016, 11:47 PM)Durandal Wrote: It's uh.. kind of dumb^
RE: Possibility of this vessel in Disco - sasapinjic - 02-11-2016
Pilot model has to have Lara Croft body ( not newest "flat" edition ) !
RE: Possibility of this vessel in Disco - VWA - 02-11-2016
What happens if the ship gets hit by a nuclear mine?
Edit: Whoops.
RE: Possibility of this vessel in Disco - Oldum - 02-11-2016
(02-11-2016, 05:39 AM)Unlucky_Soul Wrote: 1)Can the pilot model be like shrunk, i.e really tiny and inside the model?
2) Can the pilot model replace the human model in the model?
Edit: I used the pilot model in the Challenger, made some changes in the pose and incorporated it into the model
Added direct link. Check OP
1) Nope, the pilot model is actually an equipment that gets attached to the hardpoint. So unless you make the model big enough to hide the pilot, it won't work.
2) Yes it can, but the pilot equipment is made so it has a chair atached to it, which would look strange at least on the bike
RE: Possibility of this vessel in Disco - Jack_Henderson - 02-11-2016
I like the shippy.
I mean, it may be a little suicidal to fly that, but... what the heck. I would have one of those, if just for racing.
RE: Possibility of this vessel in Disco - Unlucky_Soul - 02-11-2016
(02-11-2016, 08:22 AM)Oldum Wrote: 1) Nope, the pilot model is actually an equipment that gets attached to the hardpoint. So unless you make the model big enough to hide the pilot, it won't work.
2) Yes it can, but the pilot equipment is made so it has a chair atached to it, which would look strange at least on the bike
What if we make the pilot a pillion rider? Would that work?
RE: Possibility of this vessel in Disco - Jack_Henderson - 02-11-2016
Can't the pilot + seat be "sunk" into the ship model as much as possible and the rest of it that sticks out be covered by the model-pilot?
Likely, it will all come down to scaling whether it looks appealing in the end because this racer would likely only be cool when it is not huuuuge.
RE: Possibility of this vessel in Disco - Unlucky_Soul - 02-11-2016
(02-11-2016, 09:17 AM)Unlucky_Soul Wrote: What if we make the pilot a pillion rider? Would that work?
something like this
Link to p3d.in
Direct Link
This is just to give an idea
The one in the back will be the pilot Hardpoint
RE: Possibility of this vessel in Disco - Thyrzul - 02-11-2016
Why don't you get the folk ride a bike like Jimmy's vulture? That way the seat could be blend into the model or disappear in it.
RE: Possibility of this vessel in Disco - Unlucky_Soul - 02-11-2016
(02-11-2016, 09:37 AM)Thyrzul Wrote: Why don't you get the folk ride a bike like Jimmy's vulture? That way the seat could be blend into the model or disappear in it.
Not bad idea