+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: [WIP] Hogosha Gunboat take 2 (/showthread.php?tid=175913)
RE: [WIP] Hogosha Gunboat take 2 - Zyliath - 01-05-2020
@Swallow - will give it a try, see how it looks.
RE: [WIP] Hogosha Gunboat take 2 - Zyliath - 01-05-2020
https://p3d.in/AEhJA - WiP, modified.
RE: [WIP] Hogosha Gunboat take 2 - WesternPeregrine - 01-05-2020
May I suggest making the front the shape of a double edged chisel, rather than a boat tip? Just so it can deviate a bit from the overused Kusari boatshaped gunboat front.
RE: [WIP] Hogosha Gunboat take 2 - Zyliath - 01-05-2020
https://p3d.in/IrRBR - WiP, chisel head
RE: [WIP] Hogosha Gunboat take 2 - Lucas - 01-05-2020
A bit long for my taste but it starts to look like something!
RE: [WIP] Hogosha Gunboat take 2 - Zyliath - 01-08-2020
Small heads-up: I've shortened and tweaked the model a bit, been working on the hardpoint positions in order to give it a good coverage. Will post it asap.
P.S: for those who tried MAXLancer on 3dsmax 2016, it doesn't work as intended in Treewyrm's guide: he advised me to use the 2018 version.
RE: [WIP] Hogosha Gunboat take 2 - Zyliath - 01-09-2020
https://p3d.in/lZhL6 - WiP, take 5.
Tweaked the front, shortnened the nose. Set 2 possible hardpoint positions on top and bottom of the ship's hull, nothing final yet.
RE: [WIP] Hogosha Gunboat take 2 - Felsvar - 01-09-2020
That cylinder with the nozzles still bothers me. Even then when my eyes stray away from it and focusing on other areas of the mesh, it goes right back to it!
RE: [WIP] Hogosha Gunboat take 2 - Typrop - 01-09-2020
(01-09-2020, 10:24 PM)Felsvar Wrote: That cylinder with the nozzles still bothers me. Even then when my eyes stray away from it and focusing on other areas of the mesh, it goes right back to it! ?
That's because the top ones aren't pointed in the right direction.
RE: [WIP] Hogosha Gunboat take 2 - Swallow - 01-09-2020
Please keep the first post updated with versions.