+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: Exploration shipline. WIP (/showthread.php?tid=179338)
RE: Corvo II. WIP - Save My Soul - 05-29-2020
Don't forget that there should be an "Augur" in front. And I personally really like that antenna under the bottom on the current model.
RE: Corvo II. WIP - Toaster - 05-29-2020
Your designs tend to be rather "flat" and horizontal. Maybe adding a little verticality would benefit the model. Also, agreeing with the above, it needs its antenna.
RE: Corvo II. WIP - Dealer - 05-29-2020
It could work.
RE: Corvo II. WIP - Swallow - 06-13-2020
https://p3d.in/6EAHf - 0.3.0
RE: Corvo II. WIP - HrabCOrp - 06-14-2020
Current Corvo is an adorable little ship, which has some sci-vessel vibes. I love it very, very much.
Something like Orville (Corvo doesn't look like it, but the name suites nicely IMHO), or Angelwing from Nexus: The Jupiter Incident.
+1 it needs antenna
RE: Corvo II. WIP - Swallow - 06-16-2020
https://p3d.in/6EAHf - 0.3.1
RE: Corvo II. WIP - Save My Soul - 06-16-2020
Pretty cool. But again, where will be the "Augur" hardpoint? It should be on the bow.
RE: Corvo II. WIP - Kauket - 06-16-2020
no more angelwing inspired shape :^(
RE: Corvo II. WIP - Venkman - 06-16-2020
Use that model for Condor instead of Corvo as Corvo's model is fine.
RE: Corvo II. WIP - Swallow - 06-16-2020
I will make a proper model for the scanner itself.