+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: Raven's Talon replacement (re-make) (/showthread.php?tid=39129)
Raven's Talon replacement (re-make) - Curios - 04-29-2010
Very neat work here. But i need to add mine 0.02
1. Wings between hull and engines are too long.
2. Make nose more like a talon, like in a current model.
Thanks.
Raven's Talon replacement (re-make) - DartStriker - 04-29-2010
![[Image: raven_mock.jpg]](http://img.photobucket.com/albums/v229/zeonace/raven_mock.jpg)
Okay here is a quick draw over I did of your model.
First the overall design isn't bad. But there are a few problems that need addresses.
1: That extrude you have there. Try to do it without touching both of the edges of the angles.
I would say drop two edge loops in there, one at the top and one at the bottom. Then extrude it.
Actually edge loops might be a little extreme in this case, but you get the idea I think.
2: This line is to thin, and the extrudes to deep. When making the bottom one extrude it in, but keep it at the same elevation, give it some space between the edges and then extrude it up.
3: From what I can tell you should have some polys to play with on this model still, so use them.
Create frames for these indents, it will look better in the end.
Raven's Talon replacement (re-make) - Linkus - 04-29-2010
I like it as it is now but I do think it could do with a little bit more detail.
Raven's Talon replacement (re-make) - Durandal - 04-29-2010
It's fine as it is now, most of the 'detailing' you guys are asking for can be done with textures. Sure, he probably could bring the poly count higher, but how would he do it? The model is already comfortably full of things on it as is.
Raven's Talon replacement (re-make) - Kupo - 04-29-2010
Looks like aa jet fighter attatched to the engines of anikin skywalker's pod.
It's a good thing.
We need more retro engines.
Raven's Talon replacement (re-make) - SeaFalcon - 04-29-2010
Looks nice. Love your model but I still like the old model.
But the ravens talon (Ravens claw in star wars) I think should stay the same or completely remove it for a different looking ship instead of a look'o'like.
![[Image: Szpon_Kruka.jpg]](http://www.ossus.pl/images/3/36/Szpon_Kruka.jpg)
Raven's Talon replacement (re-make) - Cosmos - 04-29-2010
YES!
This ship is made of win, It no longer looks like Desanns ship from JK2 but its a newer more epic version!
GJ
Raven's Talon replacement (re-make) - SeaFalcon - 04-29-2010
' Wrote:YES!
This ship is made of win, It no longer looks like Desanns ship from JK2 but its a newer more epic version!
GJ
ROFL
It's kyle Katarns ship in Star Wars not Desanns.
Raven's Talon replacement (re-make) - tansytansey - 04-29-2010
The ship feels very frail, particularly from the front view. I deffinately wouldn't call it a VHF with that model. Those engines also are not giving off a very freelancer-sih vibe, they look like they should be on a jet plane not a space ship.
Raven's Talon replacement (re-make) - SeaFalcon - 04-29-2010
The designers of star wars who made the ravens talon thought about it as a space ship. This has I think same size engines.
Should a ship that uses all its space in the model for a purpose. Middle is cockpit and life support systems. with 2 engines stuck on the sides nothing more needed. I really like the talon (Still don't get it why its called the talon and not claw.)