Discovery Gaming Community
Transmission Bars - Printable Version

+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: The Community (https://discoverygc.com/forums/forumdisplay.php?fid=4)
+--- Forum: Media Center (https://discoverygc.com/forums/forumdisplay.php?fid=18)
+--- Thread: Transmission Bars (/showthread.php?tid=132497)

Pages: 1 2

Transmission Bars - Lord.MacRae - 08-10-2015

Hi,

I am thinking about using a transbar and as being not the best designer I think here is the right place to ask.

It should contain the round BMF logo in the center (or more to the right).
http://s1.directupload.net/images/140603/3wkyl99f.png

On the left should be a not too small "screen" for char pictures (well I use many different ones and many different sizes). On the right should be some stuff like "transmission" bar, encryption, whatever. Char picture and name should be editable that every member could use it.

Main colours should be something like grey steel and dark orange.

If you are interested please send me some ideas. The work I choose will get 200 million credits.
Oh on thing. The design should be not that thick, except the char pic, the "slimmer" the better.

Have a nice day
Duncan

RE: Transmission Bars - Pepe - 08-10-2015

(08-10-2015, 05:16 PM)Lord.MacRae Wrote: Oh on thing. The design should be not that thick, except the char pic, the "slimmer" the better.

How much slimmer, mate? Do you have any limits that we should fit in? Like 600x200pix or something?

RE: Transmission Bars - Lord.MacRae - 08-10-2015

Hi Pepe,

I think about 630x180 would be "slim" ....

RE: Transmission Bars - Pepe - 08-11-2015

[Image: BMF-TB1_zpsicq5t8zy.png]

I hope this humble design meets your expectations, mate.

Pepe


[Image: BMF-TB-end_zpsdjlbavry.png]

RE: Transmission Bars - Lord.MacRae - 08-11-2015

Hi Pepe,

thank you for your idea.
As the BMF folk has to decide here the suggestions:

Please increase the width, so that it nearly fits the width of the post area. So about 1/3 more?
The screen on the left can be broader then about this increase, as I really need a big screen :-)

May the top bars colour be "dark brushed stainless steel" perhaps with rivets and not brown please?
Something like this:
http://thumbs.dreamstime.com/z/metallplatten-8455054.jpg (not the bright middle)
http://www.duden.de/_media_/full/M/Metallplatte-201020591603.jpg

The botttom bar can really very basic. No logo or screen needed here.



Anyone else has ideas too?

RE: Transmission Bars - Pepe - 08-11-2015

[Image: BMF-TB2_zpskbrkfe7d.png]

I've tried several kinds of brushed or carved stainless, only this one fits with your logo imho. I hope someone could offer some post-apocalyptic design you might like, or something similar and heavy that goes well with rivets. I couldn't fit rivets in, not without losing all the concept. How could you like it if I don't? Wink

I've made screen much wider and 10 pix taller now. Just say if I should do more resizing, it's part of getting the job done.

Pepe


[Image: BMF-TB-end2_zpsc3jsefab.png]


RE: Transmission Bars - Lord.MacRae - 08-12-2015

Any other ideas? Come on designers, why are you hiding?

RE: Transmission Bars - Gallows Pole - 08-12-2015

I like to make these.

RE: Transmission Bars - Lord.MacRae - 08-12-2015

Sure. Please submit your idea.

RE: Transmission Bars - Gallows Pole - 08-13-2015

Offer removed.