+- Discovery Gaming Community (https://discoverygc.com/forums)
+-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7)
+--- Forum: Discovery Developers Forum (https://discoverygc.com/forums/forumdisplay.php?fid=183)
+---- Forum: Discovery Unofficial Development (https://discoverygc.com/forums/forumdisplay.php?fid=389)
+----- Forum: Discovery Mod Content Submissions (https://discoverygc.com/forums/forumdisplay.php?fid=33)
+----- Thread: Geb Model (Poll) (/showthread.php?tid=140307)
Geb Model (Poll) - Unlucky_Soul - 06-13-2016
A continuation from this thread, I have come up with 2 models and would like to hold a poll.
OPTION A
What do you get when you take an Osiris and modify it? Well this is what you would get.
Link to p3d.in
Direct Link
Based this model upon the current Osiris with some modifications here and there.
OPTION B
My Homage to the Kushan Missile Destroyer
An asymmetrical design was made to accommodate the docking ports with the relolver type loading ports.
Link to p3d.in
Direct Link
I would like to hold a poll,and let the community decide.
NOTE: Poll ends after 30 days. The Model with the most Votes will be hardpointed, Hitboxed and submitted.
Feedback if any would be much appreciated
RE: Geb Model (Poll) - Epo - 06-13-2016
I'd say front from V1 and rest from V3
V3 has epic engines and rear, but V1's front looks better for me.
Vote went for V3 tho
RE: Geb Model (Poll) - Shalo - 06-13-2016
I think option B is the best one.
RE: Geb Model (Poll) - Caelumaresh - 06-13-2016
My vote goes for V1, but with the nose of V3 without those yellow-black warning stripes
RE: Geb Model (Poll) - Kauket - 06-13-2016
My brief analysis on A:
The first one obviously takes evolution of the Osiris from vanilla, and takes some inspiration from the Resheph's engine, whilst endorsing the carrier theme of having enlarged 'rumps' and docking modules, it gives it a significant shape symbolising power and fearlessness, reinforcing this idea with the 'spear head'.
Combining with the usage of the textures and the dynamic of the shape, it does a good job at recalling Liberty inheriting some shapes such as the tower domes and the bird-like stare at the front of the ship (similar to the LABC's nature)
The textures are well done but the hazard strips seem a bit out of place as the yellows are too saturated, drawing attention to the front hangars. Either tone down the saturation or 'shorten' it, it's too much on the nose.
but all in all, I highly prefer the first one, as it does resemble a ship, as the other does look like something out of Nexus - yes, it's a homage to homeworld, but it doesn't suit the 'organic evolution' of the Order's ship line - personally.
RE: Geb Model (Poll) - Thyrzul - 06-13-2016
I'd vote option A, but couldn't we just have someone else doing the texture jobs for your models?
RE: Geb Model (Poll) - Croft - 06-13-2016
The first one gets my vote though I think the small dome on the underside looks a little odd perhaps replace with a dish or some other sensory looking stuff? I'd also consider moving the launch tubes further out from the centre and maybe putting them at a slight angle so it doesnt look like the fighters would hit the nose section when "fired" out.
Overall it looks sweet.
RE: Geb Model (Poll) - -Rax- - 06-13-2016
I'd prefer option 1.
V3 looks way better from the back, V1 Geb has morelike the same engine as the Liberty Dreadnought. Plus, the first option seems to be lighter and has at least something new to apport esthetically talking. I bet for the first option.
RE: Geb Model (Poll) - Jinx - 06-13-2016
V3 has a nicer front section - but the mid section of V1 looks much better ... or at least not as similar to the Osiris.
The mid to rear of V1 are much better than V3 (mesh-wise as well as design wise) - the two vertical engines on V3 look too much like a kit-bash and they do actually look pretty lost on that very flat surface they are attached to.
If you cannot mix model variations anymore - i d go for V1 rather than V3, because more of the ship design is original and better proportioned .. and also because the rear on V3 does not look very good.
RE: Geb Model (Poll) - Durandal - 06-13-2016
I'll take the one that isn't a boring Osiris variant please.