So, yesterday we started with the construction of the stabilization chamber. We first had the idea to use a chamber that is built already that we use Black Nova compound test. However, even after deep cleaning said chamber we found very odd radiation signatures. This left us with no other choice than to build a new one.

We based the new chamber on the BNC chambers since we hope to achieve similar results with this pilar man material. Yet we can't foresee how anything of this will go.



With this chamber we should be capable of introducing a wide varity of chemicals and other materials to the pilar man and see how it reacts. The only concern for us is that we can't tell what destructive force is behind it if the material goes critical. Those chambers are quite sturdy but I don't think that it could prevent an explosion from happening.

For now this is all.

First of all. This Pilarman material is highly interesting. As it is a solid material we started the first experiments by heating it to over 1500°C but we got almost no real reaction besides that the material started to glow. We then proceeded to shock cool it down to around -150°C with similar effects happening. We expected at least some reaction. Maybe a break in the material, or some sounds. Nothing there was simply nothing.

After a while we got quite frustrated. Nothing we have tried over the past few days seemed to have any effect on it. We used chemicals that can eat through the strongest materials. We combined it with heat and freezing temperatures. We even tried to let it react with BNC. We finaly got a reaction but it was not what we expected. Usualy BNC is a highly unstable material that could eat up entire planets if it is held within the wrong conditions. However, it almost seemed like the BNC started to "calm" down once it made direct contact with the material. It is something that we will study later but for now this is useless for this project. Currently we are running simulations to see if there is any other material that could have those effects but reversed. To make the pilarman material active again.

For now this is all.