Ingenuus R&D: Lab 002

[Remnant]

It's become quite an impasse over here at this time. The core is as high as it's going to get in the state that it is in right now. In order for 'anything' to improve, it'll have to be in a permanent fixed space. The amount of mechanics that we have looked at, paired with the other researchers of the facility shows that it would practically become immovable once we have it seated. And the seating into the new fixture that we've been working on? That's going to be hell on it's own.

I've done some inquiries, even mentioned it to Finn about what we will do from here, and it's been reached to the conclusion that the best way to go about this, is to create a vessel which is built specifically to housing this core.. I've never designed a ship before, thankfully the other scientists seem a bit more proficient on the actual upkeep of the thing. I can focus merely on the reason why I am here, the large pulsing ball of energy which I still become confused more and more, as the times on.

So i'll put things into perspective. So far, we have managed to push the core into a more 'stable' unstable form. What this basically means, is that it's still not giving a equal amount of energy, although it does remain quite volatile. But unlike attempts before, it likes to stay in this position without getting any worse. The constant hum that is heard in the room is quite satisfactory. The good news? The core powers all of the equipment needed to keep it in the state it is right now. That saves an external source that's required. Well, I suppose that would be a side effect when you're working with things in the nature as here.

---

Enough of the summerizations of what I've already been working on. The future. Through modifications of the frequency appliance we have been giving the ball of energy for a while now, we have begun experimentation of storing it's own energy and observing it from when it is removed from the vicinity of the source.

Potential Energy Output Mechanic

So far, it has burned through all of the wires that we try putting in, even the extreme current ones. Which is quite the issue, we need to 'dull it down' even more than it's giving right now. Sometimes, high output isn't the best. Especially with the amounts we're talking about with this piece of work. The figure above illustrates a semi-controlled output from the core, through an arc.

We will not be sticking with arcs forever, as they are the complete opposite of what we want. After all, an arc will destroy any machine it comes in contact with, if it's not made to deal with the current that it gives. Something to work on.

---

For the time being, my attention will be working on this 'vessel' that it will be built around. That's priority, as it's going to be the quickest way to continue working on the device with all of the extensions that we're going to need to add on to it. After all, we are not even close to getting at our goal of making it into something which we will be able to use for many things rather than a self-sustaining vessel. Just think of the discoveries.