Base materials consuming

[St.Denis]

There are 3 Base Repair Materials.

1) Reinforced Alloys (RAs)
2) Robotic Hardware (RHs)
3) Hull Segments (HSs)

They are used in that order if they are available. So this means that if there isn't any RAs or RHs then the Base will consume the HSs instead.

All of them will be consumed at the same rate.

It is better to have all 3 of these materials on your Base just in case you get attacked. The reason for this is that every 20 seconds your Base will try and repair. It will use 2 RA and if there is still some damage it will use 2 RH and then 2 HS if the damage is still there. Each Repair Material (RM) repairs 60,000 damage.

So a Core 1 Base, if it has all 3 RMs can repair 180,000 damage every 20 seconds.

The higher Core Bases will go through that cycle of using all 3 RMs every 20 seconds depending on its level.

Ie. A Core 2 Base having sustained a large amount of damage will go -

2 x RA, 2 x RH, 2 x HS, 2 x RA, 2 x RH and 2 x HS. If this doesn't repair all the damage then it will wait 20 seconds and go through the cycle again.

Taking a Base has all 3 RMs then the damage repaired every 20 seconds is:

Core 1 - 180,000
Core 2 - 360,000
Core 3 - 540,000
Core 4 - 720,000

http://discoverygc.com/forums/showthread.php?tid=80349

I have included a link for the Player Base Guide. It has a lot of information that you should find useful.

.

---

'I would like to be half as clever as some people like to believe they are'
Life is full of disappointments, it is how we handle them that helps to define us, as a person