Pennies in the Rain - Maintenance Diary

[Euca]

Entry #1 - First Insight

---

To be completely honest, everything I was expecting was as anticipated. To note, she's simply stunning. Look at that hull colour, the internal decoration, the old Bretonian culture, it's all eye candy.

As expected, the hull will need a refit, that's obvious from the first sight of the machine. I suspect that we won't be able to tap into the supplies that are being used for capital ships, so we'll have to import ablative from Rheinland. I'll get George onto that, since all he does is lounge around all day. A fresh coat of paint or something to liven the outside would help too. Hopefully, we'll only need to redo the insides.

After have a look at the engine, it's apparent that power distribution matrix simply went bust after so long. Not only will that need to be replaced, but we'll also need to rewire the wires that extend to the engine, bridge and cargo bay. That should take an entire day, if we're lucky. According to resource management, we'll have enough fiber wiring to cover this machine.

Those appear to be the main 2 issues. The sooner we can get the ablative plates from Rheinland, the better. We'll start with the wiring, as we'll have to strip back some of the internal hull anyway to replace the fried wires. Then, we'll just replace the walls and coat them with a fresh coat of paint. No problem, right?

I certainly hope so.

Connor Sheather.

---

...End Entry

---