TO : FINN MCCOOL ; IRG | FROM : N. HANAMURA | SUBJ: A NEW REQUEST

[Remnant]

-_-_-_-_-: Secure Channel Open :-_-_-_-_-
-_-_-_-_-: Encryption Level 3 :-_-_-_-_-
-_-_-_-_-: Sender: Rachel Snow :-_-_-_-_-

Miss Hanamura,

You are correct. A lot of the information which Dr. Erzie has been working on, hasn't been as public as it perhaps should have been to the rest of the organization, you'll have to forgive me as I simply tried to fill in the holes using what information that I did have. The more which is given, the better I can ascertain the situation as a whole. I.. Appreciate the clarification. We usually get two different types of clients, you see. The first which has a general goal, and expects it to be accomplished in a fashion which we are used to dealing with things. The second, has proper specifications which has been thought out by other people, designed to come together once each division does their part.

Perhaps I'm simply a little too used to working with the first type. Forgive me.

The fact which there is a specific model of socket already chosen, makes things considerably easier on our end as well. Again, going for documentation which we have access to in regards to what you're asking from our end. Especially with a defined PGA. Worry not, I'll manage to source the information which was previously discussed, and worked by Erzie previously.

To be sure that the project specs are understood to the greatest extent, allow me to attempt to boil down this project and strip away a lot of the details for the sake of communication. The Artificial Intelligence behind the operations of the body has already been taken care of. The driver software between the mind and the body has already been defined (thus the specific QPU PGA having been chosen) - You're asking for a body designed in mind for realism. Believably. A major concern of this specification is the AI which you're feeding into the body, although that part doesn't appear to be much concern to us.

This body technology being the development of Erzie in the past. The remainder of the work to be done on it, is the interface system between the motor control of what's been developed previously, and the input/output which we'll be getting from the AI core. Basically, a replication of the previous project, producing three new bodies using the same technology done in the previous contract.

...

Listen, I realize that this may be a little unprofessional of me to say this, but I'm mildly ticked off that a project of this scale had very little information available to me despite having access to Erzie's internal documentation on Ingenuus projects that he's done. This being of no fault of your own, and is a failure on our part in previous dealings. I realize that my understanding of what's required still very well may be askew from what it should be.
As someone who is responsible for dealing with project management to some sense, I understand that my failure of understanding doesn't exactly paint Ingenuus in a very good light.

All I ask is that you work with me for a little bit here. Once a proper specs sheet has been created, and the project limits are defined, we can handle it from there. It's just getting to that point which is a little.. Difficult at the moment, given the failures in internal communication. I have a feeling that you aren't very happy with us either.

At any rate.
Please correct me if things still do not seem right.

I'll hopefully hear from you soon.

Rachel Snow
Ingenuus Research Group