Commune R&D - Project Argus

[Cortana Clark]

Terminus Research & Development Laboratories

---

Entry ID: Cortana Clark

---

Category: Construction

---

Case: Commune Weaponry Development - Project “Argus”

---

Encryption: Delta-Echo #23-k1

---

Scientific Report – Log 9

*the video log opens, and Cortana looks tired as always*

So today as I was on my way to store the fully functional prototype I went to the weapon storage, and I noticed that we have multi-barrel neutron weapons that come from the junkers... So I had the idea to use the multi-barrel to reduce the heat a bit more since I still have a slightly too high heat output.
So I first started to salvage the whole inner gear and core that was inside the weapon.. I did it very carefully because I may can use the core for future developments. I need to say that those neutron weapons had a lot of wires way more than my adapted weapon... so I made pictures so I can remember how to wire them correctly if I ever need those cores again.

So after that, I started to build in the amplyfiers and wire them.. I need to say it was quite easy because the weapon had way more room to wire everything. The only thing that concerns me a bit is, how to build the heat transmission pipe into the weapon... Anyway after the wiring I first let again let some current flow through everything to see if everything is correct... *she rolls her eyes* mhm... well I accidentally switched to cables because I didn't look right, and I switched the bourbon red wire with the wine red wire... which destroyed the amplyfier completely... after that I built a new amplyfier into the weapon... this time correctly wired..

The next step was to build in a plasma generator that I used from some older weapons I found in the storage.. the good thing was that this generator had an even better cosphi, so I need even less energy to create plasma.. if I saw it right this weapon is from the kusari naval force.. after what I considered as a small success with the implementation of the generator I decided to make a small test before I continue with adding the Black Nova Compound.

The test went quite well.. the only thing that didn't work out well was the missing of the heat transmission pipe.. I mean the cooling of the weapon worked due to the spinning barrels but, without the heat transmission pipe I'm again at the beginning with the to high energy drain... so I had the idea to close the barrels in a pipe of titanium so the heat will stack up which will be pulled through the heat transmission pipe.. like that everything should work fine...

So after the wielding which didn't go as planned first... because the titanium just was such a hard material that was nearly unbendable.. without breaking it... I needed two attempts to craft this.. but after I finally had done it I mounted it to the weapon itself it fitted like it was born for it *she laughs*


So this is it for today my next steps will be to test the weapon with the heat and energy reduction and to add the Black Nova Compound.. if the next steps work as I imagine it then we soon have a mass production weapon that will serve us well..

Cortana out.

*she lights up a cigarett while the video blurs out*

---