Restoration of a OS&C Liner

[Elvinos2003]

Restoration of Pilgrim Liner from the OS&C

System: Omicron Kappa
Location: Planet Gammu

The Pilgrim Liner of Rick Master, a Subdirector of Triton Expeditions, Captain of the ship known tagged as the OS&C|TE-Flying-Dutchman. The liner successfully landed on Gammu. The vessel followed it some minutes later due of the other members of the OS&C and the Auxesian entity A/)-AXI-F-3242. That's for sure, this one almost put Alpha-EX out of him, but he calmed down his systems and landed to start the work. The Serenity, |AI|-AIV-Procyon was near and Alpha-EX entered in it to load out the materials.

After all the necessary stuffs near the Pilgrim, the first step was to enter in it and inspect the ship. Alpha-EX was not alone for the job. Others were there about four Gammu like him. One was called Er-03 and was little. Very useful to enter in the tiny spaces. The three other were T-43, a taller about 2 meters, RG-01, as tall as Alpha-EX and finally, TPD-43, a Gammu expert in restoration. The 5 Gammu were separated. Alpha-EX in the superior levels, Er-03 was with Alpha, T-43 was at the middle levels and RG-01 and TPD-43 were in the lower levels. After many hours of expections, they regrouped at the middle levels and were talking to each others. '' The superior level are opperational. Nothing needs to be change.'' Er-03 was agreeding with Alpha-EX. '' RG-01 and I found that the hull was fragile so we will need to restore that and all the hull of the ship is in the same shape.'' RG-01 couldn't be disagree with TPD-43. '' In my side, I found the Powercore and as the human mentioned it, it needs to be change. They were all ready to start, but how to do it? It was obvious that they will need to remove all the hull and the system.
The 5 Gammu used what they could use under their hands to remove all the hull and the systems. All the hard work will take many hours or even days, unless they are not human so they could work faster and couldn't be tired like those weak creatures. Alpha-EX and Er-03 removed all the systems that were composing the ship which means the engine system, the navigation system, the weapons system, the life support system and the command system. On the icy ground of Gammu, we could see almost an ocean of cables and computers. After that done, the three other, RD-01, TPD-43 and T-43 were removing the hull inside the ship and outside. That job was done after four hours. What was remaning of the ship, was its skeleton.

It was the first day of the restoration of the Pilgrim liner. The only things that remained were:

1. Fuse the Iridium and the segment hull to make a new kind of alloy
   
2. Put the new alloy on the skeleton of the ship
   
3. Reinstall the systems that were removed
   
4. Build a new powercore for the ship
   
5. Do flight tests
   

For the rest of the day, the robots took a break.

To be continued

---