Assistance: Project CABRA

[UN]- The Unioners]

>> Y6- Type Power Generator <<

In order to get the most out of the ship's capabilities we will have to do some major upgrades in this exact order: Upgrading the generator, updating the software, and rebuilding the gravity field generator. The reason for this exact order is fairly simple if we want the gravity field generator to function correctly and not represent massive energy loss we will have to first upgrade the whole energy system. When that's done we'll be able to install fitting software that will decrease energy loss on output and with that, we will finally be able to fix that faulty gravity field generator. That being said the engineering team has decided that we will upgrade the energy generator in three steps. The required materials will be listed below:

-[Power Generator:

Since we're building a Y6- type generator, this will differ from the previous X5- type in efficiency and power output in general. First, we will build the very inner layer of the generator constructing the core by using energy field generators combined with nuclear devices to develop big enough power outputs in the heart of the generator so it can even be considered a proper generator. Of course, we will use fusion diodes to regulate the nuclear reactions within the generator.

Once we're done with building the core we will build the protection layers so that we don't fry our Corsair friends with radiation as soon as they turn the ship on. We will start with the very inner layer, constructing it out of gadolinium to shield the other layers from nuclear reactions. Once that layer is done we will dress it into a coat made out of ablative armor plating which is very well known for its energy-absorbing capabilities so that energy loss will be minimalized and we will be able to dress the reactor in the final layer of superalloy which will seal the generator shut from almost any energy loss meaning that it will be approximately 10% more efficient than the current one.

Item:	Amount:
Ablative Armor Plating	200
Energy Field Generators	200
Fusion Diodes	200
Nuclear Devices	100
Superalloy	200
Gadolinium	100

-[Wiring:

With the energy outputs adjusted we will also need to re-wire the entire ship. This is easier than it sounds since we don't need to intervene with any equipment we just need to rip out the wires and install new ones. We will first build a command table next to the generator so that the output of the nuclear reactions can be adjusted properly. For that, we will require optronics. For the wires, we will need gold and platinum. Those wires will be used all around the vessel wherever they are needed. However, for the main wiring line, we will use superconductors to minimize the loss.

Item:	Amount:
Gold	200
Platinum	250
Superconductors	100
Optronics	200

-[Fuel:

For the fuel, we will use Thorium MOX. It's a very efficient fuel used for powering nuclear reactions. It has been used for powering multiple generations of Unioner generators.

Item:	Amount:
Thorium MOX	1000

---