Project: Anchorage

[Liberty Navy 46th Fleet]

Project: Anchorage

---

Liberty Navy 46th Fleet
Security Clearance: < CLASSIFIED >

---

ACCESSING DATABASE

---

Project Anchorage Overview:

Project Anchorage: "CV-3 Osiris"

At present, the Flagship for Fleet Admiral Martin Kemp-Smith, has been of the Interdictor Class Assault Battlecruiser, the LNS Anchorage. The Anchorage has served Liberty, the Fleet and Kemp-Smith well. Through her service since her commissioning, she has seen many a battle against various groups that would see harm to Liberty, her interests and citizens. The Anchorage, in her finalized configuration, on many an occasion has felt lack-luster in terms of combat capabilities against larger classifications of Battleship or Carrier. She was to primarily serve to allow for smooth Command and Control of local forces, while retaining an offensive element to assist the assets under Martin's command.

The Interdictor Class is lacking the ideal offensive capabilities for ranged engagements, despite the increased maneuverability over that of the Overlord and Atlantis Class vessels. So the proposed, yet unorthodox planned solution, is to utilize blueprints for what is now considered an archaic design and build, from scratch, a CV-3 "Osiris" Class Battleship. While known to be not as heavily armored, nor as offensively capable as the more modern Overlord's, does make up for with a small, sleek design. Packing more of a punch that that of the Interdictor Flagship, but more maneuverable than Liberty's own Overlords; a compromise deemed acceptable for what may prove to be a very capable replacement, given that it can be built to Liberty's specification to suit current doctrine.

It is intended for anticipated crew that will be assigned to this project to undertake joint-training with the Fifth Fleet's serving Osiris, the Akhetaten, which ideally will be overseen by both the Admiralty of the Fifth and Fourty-Sixth Fleet's, respectively. Their insight will prove to be of great value in bringing this project to fruition and it is planned for coordination to occur to see this through to the very end.

This project will be completed in several phases and are outlined below:

Phase I: Acquire Materials

Naturally, as with any ship building and manufacturing, sufficient materials will be required in line with proper manufacturing processes. Appropriate Corporations within Liberty to be contacted to provide transport services to assist in this regard.

Phase II: Begin Manufacturing

Given the nature of this classification of vessel, it would be appropriate to select Juneau Shipyard in Alaska, where the manufacturing and building will commence. Oversight by the Admiralty, in line with engineering and mechanical requirements.

Phase III: Structural and Test Flight

On completion of the build, a test flight will be undertaken to ensure correct functioning of initial systems, flight thrusters and navigation systems.

Phase IV: Weapons Test

A initial weapons test will be undertaken at this stage to ascertain suitability between the installed power core and operational requirements.

Phase V: Auxiliary Systems Test

Auxiliary systems fitted to the CV3-001 will be tested here to ensure full working order and complete all required checks prior to Operational Deployment.

Phase VI: Commissioning

On completion of successful tests across all systems and a brief non-combat deployment, the newly built CV-3 will be commissioned in to the Liberty Navy Forty-Sixth Fleet.

Phase VII: Deployment

Once the Commissioning of the Anchorage is complete, she will assume a non-combat role within the fleet per her doctrine specifications. This will remain until such time as her powercore issues are fully resolved.

-

---

Liberty Navy 46th Fleet

---

Information ≛ Recruitment ≛ After Action Reports ≛ Feedback

---

"Honour. Courage. Commitment."

Tag: 46th|
Discord Server: [X]
Liberty Navy 46th Fleet