any idea how to start?

[Beiowolf0615]

i tried GL workaround 1.0 and nothing happens.

router is Kasda KD318-MUI
ask if you need to know anything else

I've do some research for you.
It appears that your router's firmware is either an older version or been updated. So you find it different from PortForward.com's solution.
Here's somthing what I found for you:
A.
1. Read your manual Section 5.4, setting your KD318MUI as a ROUTER which it works as a BRIDGE now.
2. If your manual is nowhere to found. check here.
3. After all is done. Try out FL-DISCO with the shortcut that given by DISCO-Mod.
4. If still not work. Log into your router again check out if the NAT thing shows up.
4. Check This thread as a referance.
B.
1. Visit this page . It's another model of the same company.
2. Try to find NAT setting page in your router's interface, I guess it most likely could be found in the Quality of Service.
3. If NAT found, try to set up the rules referring to PortForward,com.

C.(when option A&B both fails...)
1. Go to the shop where you bought your ADSL2+ or any Computer Electronics shop ask for help.
2. Get another router........:lol:

That's all I can do for you...Good luck pal.
Hope can see you in space.