Slaver Ship

[Shaka]

Dumb Questions:

(I'm using metasequoia)

1. How do I create a mirror plane? I.E. create half of a ship, then mirror it over to make it symmetrical.

2. How do I select and then extrude multiple faces?

3. Let's say I have a face that I want to make into an intake. How do I make a smaller square on that face so that I can push it inwards?

Thanks


EDIT:

Because I'm apparently in an uninhabited timezone, I have decided to forge ahead. Feast your eyes on the updated slaver ship.

I've overall made it more pointy and sloped, eliminating a lot of the "blockiness". Although, it is still quite blocky.









Things to work on.

1. Those ugly chunky wings.

2. The fangs - I think the faces are all messed up

3. continuing to make it less blocky

4. again, details are still needed

5. That block on the side is supposed to be a big engine, it should look like one.



My thoughts on the ship.

I think of these things as working in packs of 2 or 3, hiding among 'roids and ambushing Lux Liners. They'd be patched up ships, like the slave liner, and wouldn't be too powerful. In RP at least. I think that realistically you'd need to amp up the power maybe more than they might actually be. These ships shouldn't be useless on their own. As attackers of large, well defended Luxury craft, I think this ship could merit GB class. Probably more of a heavy gunboat, with a forward gun. If it was less maneuverable, but had mostly forward firepower, then it would work well against large ships, but wouldn't destroy other gunboats or small craft. Because of it's badass design :cool:, it's use would have to be limited better than the slave liner to prevent overuse. I was thinking of calling it Sabertooth.

Again, constructive criticism is welcome. Just remember, this is nowhere near a final design.

---

RFP File |Josef Marks' Story|Feedback