renzu LF, HF, VHF

[Jinx]

ok - first of all - those are meant to be placeholders, not final models ( their quality isn t exactly high )








it follows the usual vanilla characteristics by adding certain "parts" to make progress from light to heavy.


to understand the sizes - the mainhull is roughly patriot sized ( hence the lf is basicly just a patriot like tube ) - the wings add a lot of surface to be hit - but the ship is still on the smaller side ( about GC VHF like )



why make placeholders of such low quality? - cause it "fixes" the line to be the renzu line. - gives them a slight kusari touch ( not much, sorry about that ) - all in all, its just meant to be a reminder for the modeller to work on a higher quality ship.

the design is meant to be something like a "wannebe-sleek" design. its meant to be a little cheap, not as solid as the real military line... well - something a kusari youth with enough money would buy - basicly all kippers and curtains.





there is just one thing left... - due to the wings there is no vanilla hitbox i can bend to fit - and i don t have time to make a hitbox.

so if seth or someone else is willing ( or has way too much spare time ) to make those three hitboxes, we could include them for now. - otherwise, they ll remain nothing but "a reminder" for .87 to work on a high quality line.


edit: again - these three ships are rather low quality and not too inspired, but might still fit better than the homeworld design atm.

edit2: hm, maybe we should rename the LF into "tick" - looks the way sort of.

---

Shipdesigns made for DiscoveryGC