![]() |
|
Rhino+Freelancer ID tech compat - Printable Version +- Discovery Gaming Community (https://discoverygc.com/forums) +-- Forum: Discovery Development (https://discoverygc.com/forums/forumdisplay.php?fid=7) +--- Forum: Discovery Mod General Discussion (https://discoverygc.com/forums/forumdisplay.php?fid=37) +--- Thread: Rhino+Freelancer ID tech compat (/showthread.php?tid=85591) |
Rhino+Freelancer ID tech compat - Phillip.Jokar - 08-14-2012 I've just gotten back into the game after a while and the new tech compatibility system is boggling me a bit. I've got a Rhino fitted with all civ guns and a freelancer ID but I'm getting an incompatibility message and having my efficiency dropped to 10%. What do I have fitted that is causing this? 1x Heavy Starbeam 2x Adv Starbeam 5x Bluebell Turret Sentry Fr. Shield Thruster Scanner Freelancer ID Edit: Now all of a sudden it's reducing it to 90% instead of 10%??? Does cargo you're carrying change it too? Rhino+Freelancer ID tech compat - SummerMcLovin - 08-14-2012 The tech chart gives all the current combinations available, and this shows the Freelancer ID only gets 90% core for a Liberty Civilian ship like the Rhino. They are 'supposed' to use Border World or Sirius-wide Civilian ships. The initial 10% sounds to me like you may not have equipped the ID, only having it in your cargo hold after transferring it to your new ship. Rhino+Freelancer ID tech compat - Phillip.Jokar - 08-14-2012 ' Wrote:The tech chart gives all the current combinations available, and this shows the Freelancer ID only gets 90% core for a Liberty Civilian ship like the Rhino Thanks, I had only seen the chart with yes/no compat options instead of percentages. That'll help out a lot. Rhino+Freelancer ID tech compat - Jayce - 08-14-2012 Are you sure you weren't reading it wrong the first time, or was your ID unmounted? Rhino+Freelancer ID tech compat - Phillip.Jokar - 08-14-2012 ' Wrote:Are you sure you weren't reading it wrong the first time, or was your ID unmounted? Pretty sure it said 10% that's why I was so concerned. I made sure the ID was mounted the entire time as soon as I purchased it and didn't touch it between the 10-90% change, just unmounted and remounted the turrets and switched around some cargo. Rhino+Freelancer ID tech compat - Jayce - 08-14-2012 ' Wrote:Pretty sure it said 10% that's why I was so concerned. I made sure the ID was mounted the entire time as soon as I purchased it and didn't touch it between the 10-90% change, just unmounted and remounted the turrets and switched around some cargo. Huh. Interesting. Probably was just an FLHook error. Rhino+Freelancer ID tech compat - Ipuvaepe - 08-14-2012 Or someone forgot to set the rhino as liberty civilian. There are a lot of ships, not surprising a rarely used basic freighter would be forgotten. |